See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Case Erector » Tape » Page 4
Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.
Lantech, Model C-2000, automatic, case erector and bottom taper. Case size range: 8" to 25 5/8" in Length; 6" to 17" in Width; 4" to 23" in Depth. Equipped with 44" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 32" long x 4" wide side belt asset conveyors. Control panel with AB controller and push button start / stop. Mounted on heavy duty base frame with locking casters. Rated from 5 to 15 cases per minute – depending on materials, application and machine configuration.
OAD: 103"L x 85"W x 80"H
Pearson, Model R23501, automatic, case erector and tape bottom sealer. Rated from 1 to 30 cases per minute – depending on materials, application and machine configuration. Case size range: 8¾" to 23½" in Length; 5" to 16" in Width, 8¼" to 21" in Depth. Equipped with 56" long x 18" wide (4) chain automatic blank case magazine, suction cup pic n place and case erecting squaring system, 75" long dual lugged chain conveyor, single top lugged chain with top hold down, top flap lifters and rear flap closers and plow and 3M Accuglide 2" tape sealer. Control panel has an AB controller with push button start / stop / jog. Mounted on heavy duty base frame with interlock safety guarding.
OAD: 206"L x 90"W x 94"H
Pearson, Model R23501, automatic, case erector and tape bottom sealer. Rated from 1 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 8¾" to 23½" in Length; 5" to 16" in Width, 8¼" to 21" in Depth. Equipped with 56" long x 18" wide (4) chain automatic blank case magazine, suction cup pic n place and case erecting squaring system, 75" long dual lugged chain conveyor, single top lugged chain with top hold down, top flap lifters and rear flap closers and plow and 3M Accuglide 2" tape sealer. Control panel has an AB controller with push button start / stop / jog. Mounted on heavy duty base frame with interlock safety guarding.
OK International Model Duraformer 2, case erector / bottom taper. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 60" blank case magazine, Tri-Grip pneumatic erector arm, reciprocating vacuum suction cup pic-n-place and squaring device, 2" bottom tape head with dual 60" long side belt case conveyors. A/B PLC touch pad controller with panel view. Speed dependant on materials, application and machine configuration.
OAD: 120" L x 68" W x 78" H
ABC, Model 330T, automatic case erector and bottom tape sealer. Case size range; 7" to 22" in Length; 5¾" to 16" in Width; 7" to 22" in Height. KD dimmensions: 12" to 38" in Length; 8" to 29¼" in Width both (RSC) and (HSC) cases. Equipped with a 64" long easy load automatic blank case magazine, suction cup pick and place with self-adjusting spring loaded suction cups, suction cup case erector, major and minor flap closers, walking beam case transfer, 45" long x 2½" wide dual upper and lower case belt drive transports thru 2" tape head and Siko gages. Control panel with touch screen and e-stop buttons. Interlock gull-wing safety guarding.Speed dependant on materials, application and machine configuration.
OAD: 200" L x 70" W x 76" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.