See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Sealer Bag » Page 4
Sealer bag equipment or bag sealing equipment is designed to seal various kinds of pre-made bags or pouches. Bags can be sealed using impulse heat, hot melt glue, hot air (to re-activate pre-applied glue), thread stitching, or many other bag sealing methods. Depending on the bag sealer machine, the bag may have the opening of the bag folded over prior to sealing. Bag sealers can be designated as semi-automatic or automatic. Semi-automatic bag sealers require the operator to present the bag to the bag sealer in the proper manner and to activate the bag sealing cycle. The operator is responsible for closing the bag, and tucking the bags flaps, if necessary. The operator is also responsible for discharging the bag from the machine. Automatic bag sealers have the bag fed into the bag sealer automatically with a conveyor or by some other method. The bag sealer then automatically closes the bag, automatically tucks the bag flaps if necessary, and automatically seals the bag.
Fuji Foremost, Model GTSBLXF2, Automatic, stainless steel, horizontal, bagger. Rated from 20 to 90 bags per minute – depending on materials and application. 316 stainless steel shaft construction with 304 stainless steel covers. Product size range: 6" to 15" in Length; 3" to 8" in Width. Maximum Bag size: 20" in Length. Equipped with (2) 30" long x 10" wide product in feed spacing conveyors, (4) product pusher paddles set on 38" centers and bag gripper with air assist bag opener and product assist discharge. Control panel has A/B PLC controller and A/B Panelview with high / low pressure air nozzle, air cylinder open and carriage control dials with run, jog, stop, e-stop push buttons and statis light bar. Mounted on stainless steel frame with flip up safety guarding.
Automatically inserts product into preformed polyethylene bags. Ideal for bagging bread loaves, crackers, frozen ears of corn, surgical supplies, bar soap and a wide range of other products
OAD: 140" L x 60" W x 80" H
Bandrite Model 6000, Right to left, automatic, continuous motion, band style, bag sealer. Rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. and hand crank adjustable for different size bags. Mounted over 6" wide x 96" long belt conveyor with adjustable guides and powered by a ¼ Hp drive.
OAD: 110" L x 36" W x 59" H
Bandrite, Model 6000, Right to left, automatic, continuous motion, band style, bag sealer rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. and hand crank adjustable for different size bags. Mounted over 6" wide x 96" long belt conveyor with adjustable guides and powered by ¼ Hp drive. Coder requires seprate type.
Bandrite, Model 6000, Right to left, automatic, continuous motion, band style, bag sealer rated from 0 to 750 inches per minute with number of product – depending on materials, application and operator dexterity. Equipped with bag trim station, 1 line coder, ¾" wide heat sealing and cooling bar, angled sealing and tilt away drive head, non-marking carrier belts with adjustable running speeds and temperature controls up to 600 Deg F. and hand crank adjustable for different size bags. Mounted over 6" wide x 96" long belt conveyor with adjustable guides and powered by ¼ Hp motor drive.
Doboy, Model CBS-CH, right to left, continuous motion, chain fed band sealer rated from 0 to 425" per minute with number of product – depending on materials, application and operator dexterity. Equipped with trimmer, (2) sets of ¼" wide heat sealing bars and (1) water chilled cooling bar, tilt head, 1" wide metal bands, flip up safety cover and chain thru carrier for better bag support. Control panel with heater 1 and heater 2 temperature controllers and on / off heat switch. Mounted on base frame with casters and hand crank height adjustment; includes 8" wide x 142" long Hytrol belt conveyor.
OAD:142" L x 55" W x 62 " H
Doboy, Model CBS-CH, left to right, continuous motion, chain fed band sealer rated from 0 to 425" per minute with number of bags – depending on materials, application and operator dexterity. Equipped with trimmer, (2) sets of ¼" wide heat sealing bars and (1) water chilled cooling bar, tilt head, 1" wide metal bands, flip up safety cover and chain thru carrier for better bag support. Control panel with heater 1 and heater 2 temperature controllers and on / off heat switch. Mounted on base frame with casters and hand crank height adjustment; includes a 12" wide x 130" long Hytrol belt conveyor.
OAD:130" L x 55" W x 64" H
Fischbein, Model HAS 300, left to right, hot air bag sealer rated from 30 to 60 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Will run most heat sealable pillow and gusseted bags with maximum bag thickness of 10 mils and free bag top of 6" minimum. Equipped with 48" long dual compression belt sealing section and mounted above a 12" wide x 108" long belt conveyor. Control panel has push button start / stop. Digital touch pad controls for heat, roller tension and air pressure. Up / down switch and VFD speed control. Mounted on powered height adjustable base frame with casters.
OAD: 125"L x 48"W x 78"H
Fischbein Model PBC 6000, right to left, pre-applied glue, bag heat sealer rated from 0 to 85 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Bag size range: 4" to 26" in Width up to 56" Length. Filled bag weight from 1 lbs to 110 lbs, will run most gusseted and flat bags. Equipped with front break away channel, bag guide with folding plow for single fold, electric heater to heat up and activate pre-applied glue, adjustable pressure 12" long dual compression belt section. Control panel has touch pad with heater on / off and motor run, auto, stop switches, bag jam detection, over temperature sensor shut down, with start, stop, e-stop push button controls. Mounted on hand crank height adjustable base frame with casters and 10′ long x 12" wide black PVC product belt conveyor.
OAD: 120" L x 33" W x 60" H
Doboy, Model GS1000S, high speed, mount over conveyor, double fold, hot melt, bag sealer. Rated from 0 to 100 feet per minute, with number of bags – depending on materials, application and machine configuration. Bag size range: 3lbs to 20lbs, Bag Width: 3½" to 15". Equipped with top bag carrier chain, rotary trimmer, (2) fold stations, outer glue seal station with Nordson hot melt glue applicator and 36" long compression section with hand crank height adjustable frame. Control panel has touch pad controls, glue gun and glue heat on / off switches and Lexan safety guarding. Mounted on (6) leg base frame with casters.
OAD: 151" L x 60" W x 87" H
Doboy, Model S-CH-S, in line, heavy duty, band bag sealer. Rated from 0 to 100 feet per minute with number of bags – depending materials, application and operator dexterity. Can handle up to 8 mil gusseted and coated woven poly propylene bags. Equipped with (4) sets of ¼" heat sealing bars and (2) sets of water chilled cooling bars, 64" long x 1" wide teflon bands and belt thru carrier for heavier bag support with flip up safety covers. Control panel has Koyo PLC controller with touch pad operator interface and readout with e-stop and statis light bar. Mounted on hand crank, height adjustable stand to go over existing conveyor.
OAD 142" L x 60" W x 78" H
Fischbein PBC6000 hot air bag sealer rated from 0-85 linear feet per minute for 18-100lb pre-glued multi wall, flat or gussetted pinch-style paper bags. With on/off safety switches, bag jam detection, over tepmerature sensor shut down, bag top air scrubber. Mounted over a Hytrol TA, 130" long x 12" wide, rubber belt conveyor. Equipped with a Relience SP500 variable speed control and a 1/2 hp drive.
OAD: 132"L x 36"W x 60"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.