See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Tube
Tube filling equipment fills tubes with product and seals the tubes. Tube fillers and tube sealers can be made out of plastic or metal. Using a toothpaste tube as an example, a standard tube machine will take an empty tube upside down (cap pointing toward the floor), insert the product into the tubes, open upper end, and seal the tube after the product has been inserted. Different types of sealing are available for both plastic and metal tube equipment. Frain supplies these machines and this equipment for sale, rent and also buys.
Norden Model NM400HA, Automatic, hot air, plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute – depending on materials and application. Tube size range: 3/8" to 2" OD x 2" to 10" in Height. Fill range: 1oz. to 10oz. with proper change parts. Equipped with empty tube loading chute, 12" OD x 24" long product hopper, 16 pocket rotary turret, with registration, bottom up fill, no tube / no fill, hot air sealing system, trim station with discharge chute and conveyor. Control panel has temperture gauge and push button controls. Mounted on heavy duty frame with interlocking safety guarding.
OAD: 64" L x 60" W x 78"H
Norden 602 automatic, metal tube filler and (saddle fold) sealer. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: to 300ml Equipped with cassette style tube magazine, 18 pocket rotary turret, print registration, product hopper with level sensor, positive displacement fill station, bottom up fill, no tube / no fill, metal tube closure and faulty tube stop. Additionally features PLC controller with touch screen, 10 character code slot (able to code one or two side), E-stop, status light, interlocked guarding, stainless steel contact parts. Mounted on anodized aluminum frame with leveling legs. Change parts required to accommodate size and fill range. Speed dependent on materials, application and machine configuration.
OAD: 89" L x 40" W x 88" H
Norden Model AM1000, Automatic, stainless steel, metal tube filler and sealer rated from 20 to 100 tubes per minute – depending on materials, application and tube size: 10mm to 50mm in Diameter; 50mm to 250mm in Length with volume of fills – depending on materials, application and proper change parts. Equipped with 30" long empty tube magazine, stainless steel conical product hopper with auger and level detection, (22) 3" ID tube pockets set on 4" centers with no tube / no fill, bottom up fill and crimp fold seal. Control panel has hand / auto, run / jog switches, stirrer and heater controls with start, stop, e-stop and hand held controller. Mounted on stainless steel frame.
OAD: 78" L x 58" W x 99" H
Norden, Model 602, automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 60 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height cap included. Fill range: 1ml to 360ml (both with proper change parts). Equipped with stainless steel product hopper, cassette style empty tube magazine and feed chute,18 pocket rotary turret, tube registration and orientation, no tube / no fill, bottom up fill, hot air sealing jaws, with Thermo Scientific Thermoflex 2500 recirculating water chiller and level controller. Control panel has Norden Easyware ELAU controller with color touch screen control panel and start, stop, e-stop push buttons and statis light. Mounted on stainless steel frame with interlocking safety guarding and leveling legs.
Norden Model 602, automatic, hot air, plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: 1ml to 300ml all with proper change parts. Equipped with stainless steel product hopper, cassette style empty tube feed chute with 18 pocket rotary turret, tube registration, orientation, no tube / no fill, bottom up fill, hot air sealing jaws, with recirculating water chiller and level controller. Control panel has Norden Easyware ELAU controller with color touch screen control panel and start, stop, e-stop push buttons and statis light. Mounted on stainless steel frame with interlocking safety guarding and leveling legs.
OAD: __” L x __” W x __” H
Cotupas, Model RS58-D, Semi automatic, rotary tube filler and sealer with number of tubes per minute – depending on materials, application and operator dexteriy. Equipped with 21" ID x 16" deep dual stacked stainless steel product hoppers and temperature probe, 24" OD rotary turret with (12) 1-1/4" ID tube holders set on 5-1/2" centers and 1/4" OD product nozzle, bottom up fill, no tube / no fill, and ejection station. Control panel has water bath, pre-dose and purge on / off switches, with power on, start, stop, e-stop push buttons and vari-speed controller. Mounted on (4) leg base frame with height adjustable legs.
OAD: 55" L x 24" W x 68" H
Unipac, Model Silver 80, automatic, plastic or laminate tube filler and sealer. Rated from 10 to 40 tubes per minute – depending on materials, application and machine configuration. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: 3ml to 450ml, Proper change parts required per different applications. Equipped with tube magazine, tube depressor, 18" ID x 20" Deep jacketed stainless steel product hopper with level detection, 12 pocket rotary turret, registration, bottom up fill, hot jaw sealing system, trim station and interlocking safety guarding. Control panel has push button start / stop and digital temperature controls. Mounted on heavy duty base frame.
OAD: 55"L x 50"W x 85"H
Norden Model AM1000, automatic, stainless steel, metal tube filler and sealer rated from 20 to 100 tubes per minute – depending on materials, application and machine configuration. Tube size range:10mm to 50mm in Diameter; 50mm to 250mm in Length with proper change parts. Equipped with empty tube magazine, stainless steel conical product hopper with level detection, tube registration, air cleaner, bottom up fill, saddle fold seal, emboss code and Control panel with e-stop. Mounted on stainless steel frame with safety guarding.
OAD: 78" L x 57" W x 90" H
Unipac, Model Silver 100, automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 40 tubes per minute – depending on materials, application and machine configuration. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: 3ml to 230ml, Proper change parts required per application. Equipped with tube depressor, air blast cleaning, 18" ID x 20" Deep jacketed stainless steel product hopper with agitation and level detection, 16 pocket rotary turret, registration, bottom up fill, no tube / no fill, hot air sealing system with emboss coder, trim station and interlocking safety guarding. Control panel has push button start / stop and digital temperature controls. On / off switches for orientator, no product, product level, agitation, tube cleaning, blower and heater. Mounted on heavy duty base frame.
OAD: 60"L x 60"W x 87"H
Norden, Model NM400HA, Automatic, hot air, plastic or laminate tube filler. Tube size range: 3/8" to 2" in Diameter; 2" to 10" in Height. Fill range: 1oz to 10oz. Equipped with cassette style magazine, tube depressor, 16 pocket rotary turret, registration, 16" diameter by 22" Deep stainless steel product hopper, bottom up fill, no tube / no fill, hot air sealing system, trim station and interlocking safety guarding. Control panel has an AB controller with start, stop, e-stop controls. Speed dependent on materials, application and machine configuration. Change parts required to accommodate size / fill range.
OAD: 68"L x 58"W x 83"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.