See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Fitzmill » Page 3
Fitzmill, Model D6A, Compact, enclosed GMP sanitary design, 316 stainless steel construction, pharmacutical hammer mill, with pounds of product per hour – depending on materials and application. Enclosed process chamber with (16) fixed stainless steel knife / impact blades and 5½” long x 13½” wide product discharge. Remote control panel has speed adjust dials and start, stop buttons for mill and feed screw with feed screw rpm and machine amp readouts with e-stops. Mounted on stainless steel frame.
OAD: 50"L x 51"W x 30"H – Mill 37"L x 40"W x 73"H – Controls
Fitzmill, Model D6A, compact, on-wall design, 316 SS construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 16" deep stainless steel product feed hopper 3" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades and 5½" long x 13" wide product discharge port with 31" ground clearance. The in-wall and on-wall configurations of the VFS-D6A are designed to contain the drive motors in a separate room or technical area. Control panel has Mill and VFS start/stop push button controls.Used for precision grinding and controlled particle size reduction in pharmaceutical processing and other sanitary industries.
OAD: 42"L x 51"W x 61"H – Mill 22"L x 34"W x 50"H – Controls
Fitzmill, Model DASO6, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 23" long x 13" wide x 10"H deep hopper, 5" diameter feed throat and (16) swing knife / knife blades powered by 7½ Hp motor drive. Product discharge port is 16” long x 5½” wide with 39” floor clearance. Mounted on (4) leg frame with casters.
OAD: 42"L x 36"W x 69"H
Fitzmill Model DAS06, 316 SS, hammer mill with pounds of product per hour – depending on materials and application. Equipped with 12" long x 12" wide x 10" deep hopper, 3" diameter feed auger. Stainless steel screw feed and safety guarding with (16) fixed stainless steel reversible knife / impact blades with 6" long x 14" wide product discharge with safety grid and 30" floor clearence. Control panel has estop push button control. Mounted on (4) leg stainless steel frame with locking casters. Used for precision grinding and controlled particle size reduction in pharmaceutical processing and other sanitary industries.
OAD: 50"L x 57"W x 70"H – Mill 44"L x 28"W x 62"H – Controls
Fitzmill, Model D6, 316 Stainless steel, hammer mill. Equipped with 20" wide x 30" long x 5" deep feed pan, 6" wide x 8" high feed throat, 6” long x 10” wide chamber and (16) swing knife / impact blades powered by 7½ Hp motor drive. 9½” long x 5½" wide product discharge with 28” floor clearance. Rates dependent on materials, application and machine configuration.
OAD: 30" L x 48" W x 56" H
Fitzmill, Model D6A, 316 Stainless steel, comminutor mill with production rates per hour – depending on materials, application and operator dexterity. Equipped with 20" wide x 36" long x 5" deep feed pan, 7" wide x 8" high feed throat, 14” long x 6” wide blade chamber and (16) fixed knife / impact blades powered by 7½ Hp motor drive. 12” long x 6" wide product discharge with 42” floor clearance. Mounted (4) leg mild steel frame with casters. Used to grind, de-lump, pulverize and process wet / dry products.
OAD: 40" L x 54" W x 72" H
Fitzmill, Model D6A, compact, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 8" deep stainless steel product feed hopper 3" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades and 14" long x 10" wide product discharge port with 33" ground clearance. Mounted on stainless steel frame.
OAD: 62"L x 40"W x 68"H
Fitzmill, Model D6, comminutor mill with stainless steel contact parts. Production rates per hour – depending on materials and application. Equipped with 10" wide x 12" long x 8" deep Hopper, 4" wide x 6" high feed throat and (16) fixed impact / impact blades powered by 7½ Hp drive. Product discharge is 9¾” long x 5½" wide with 32” floor clearance. Mounted (4) leg mild steel base frame with casters. Used to grind, de-lump, pulverize and process wet / dry products.
OAD: 58" L x 32" W x 68" H
Fitzmill, Model DKAS012, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 14" long x 13" wide x 3" deep feed pan, 8" diameter feed throat and (32) fixed knife / impact blades powered by 20 Hp motor drive. Product discharge is 15” long x 13” wide with 35” floor clearance. Mounted on (4) leg frame with casters.
OAD: 61"L x 50"W x 75"H
Fitzmill, Model D6A, compact, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 8" deep stainless steel product feed hopper 4½" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades, vacuum system for dust control and 15" diameter product discharge port with 36" ground clearance. Mounted on (4) leg frame with locking casters.The in-wall and on-wall configurations of the VFS-D6A are designed to contain the drive motors in a separate room or technical area. This leaves only a few easily disassembled product contact parts in the process area.
OAD: 61"L x 48"W x 63"H – Mill
Fitzmill, Model FASO20, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 36" wide x 36" long x 20" deep hopper and 48 blades, powered by 30 Hp motor drive and has 15" x 18" discharge port with 31" of ground clearance. Mounted on (4) leg stainless steel frame.
OAD: 80"L x 62"W x 96"H
Fitzmill, Model D6A, compact, on-wall design, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 8" deep stainless steel product feed hopper 3" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades and 16"diameter product discharge port with 33" ground clearance. The in-wall and on-wall configurations of the VFS-D6A are designed to contain the drive motors in a separate room or technical area. This leaves only a few easily disassembled product contact parts in the process area.
OAD: 48"L x 38"W x 68"H – Mill 32"L x 21"W x 52"H – Control
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.