See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » PDC Intl. Corp.
PDC, Model KRC184654, stainless steel, over the conveyor, neck band or sleeve labeler, hot air shrink tunnel with number of product per minute – depending on materials and application. Equipped with 4-1/4″ Wide x 5″ High x 46″ long heat shrink chamber capable of handling 4″ diameter necks and 4″ high bands. Control panel has A/B controller and single top mounted blower motor and temperature controller with e-stop. Mounted on KAL-200 auto-lift height adjustable stand and has 74″ long x 38″ wide x 74″ high enclosed plastic safety guarding.
OAD: 44″ L x 30″ W x 62″ H Shrink Tunnel
74″ L x 38″ W x 74″ H Overall
PDC Model 75E, automatic, stainless steel, continuous motion, shrink neck bander and sleever. Rated from 30 to 300 containers per minute – depending on materials and application. Neck band size range: 3.5″ OD x 6″ high. Full shrink sleeve size range: 3.5″ OD x 9″ high. Equipped with 144″ long x 3-14″ wide delron product conveyor with 36″ in feed / discharge height and container senser. 24″ long worm screw container indexing, powered stepper motor film feed with bottom film unwind disc, feed rollers, film tensioner, film registration, low material, film out sensor, splice table with splice detector sensor to stop machine, film forming wedge, blade assembly and hand crank jog with PDC Model BDE-102 air reject with catch basket. Control panel has A/B CPU controller and touchscreen operator interface with machine raise / lower switch, machine power on, start, reset and e-stop push button controls. A/B powerflex vari speed controls, Hirshmann ethernet switch RS2-TX/TX and control tower stack light. Mounted on stainless steel frame with 47″ long x 37″ wide x 54″ high enclosed interlocking plastic safety guarding.
OAD: 32″ L x 24″ W x 75″ H Applicator
47″ L x 37″ W x 54″ H Guarding
144″ L x 60″ W x 80″ H Total Overall
PDC Model 65-ER, Eight station rotary tamper evident neck bander / sleever labeler rated from 50 to 200 neck bands and 50 to 175 sleeves per minute – depending on materials and application. Band / Sleeve size range: 3/8" to 3-1/4" in diameter; 5/8" to 6" in Height. Equipped with 24" worm screw in feed, vertical perforation, 8 station rotary band placer, registration, static elimination, low film indicator, powered film feed drive, splicing table, material out sensor, E-stop, and barrier guarding. Mounted on stainless steel frame with height adjustable feet. Machine to be mounted above conveyor.
OAD: 50"L x 51"W x 82"H
PDC inline, stainless steel, left to right, continuous motion, neck bander / sleever with shrink tunnel. PDC Model 75E neck bander / sleever. Band size range: 3.5" OD x 6" high. Sleeve size range: 3.5" OD x 9" high. Equipped with 144" long x 3-1/4" wide conveyor 36" in feed and discharge height, 24" indexing screw, dual powered stepper motor film feed, film tensioner, material jam, low material, film out sensors, splice table with splice detector sensor film registration and vertical perforator. A/B PLC, touchscreen, Powerflex VFD controllers and interlocking safety guarding.Change parts required to accommodate size range.
PDC, Model KRC184654, stainless steel hot air shrink tunnel. Equipped with 4-1/4" wide x 5" high x 46" long heat shrink chamber. A/B controller with single top mounted blower motor, temperature controller and E-stop. Mounted on KAL-200 auto-lift height adjustable stand.
Speed dependent on material, application and machine configuration.
OAD: 32" L x 24" W x 75" H Applicator 47" L x 37" W x 80" H Guarding
OAD: 44" L x 30" W x 62" H Shrink Tunnel 74" L x 38" W x 74" H Guarding
PDC Model 75M, automatic, tamper evident, neck bander / sleever rated from 50 to 300 containers per minute – depending on materials and application. Bands: 3/8" to 3" in diameter by 3/4" to 2" in height. Equipped with worm screw in-feed, knife film cut-off, barrier guarding, auditory alarm and E-stop.
OAD: 44"L x 37"W x 84"H
PDC, Model 75-M-ID, automatic shrink sleeve labeler and tamper evident neck bander. Rated up to 400 containers per minute – depending upon materials, application and machine configuration. Band Diameter: 0.375" to 3.5", Band height: 0.625" to 9". Equipped with 12" long product in feed worm screw, star wheel container indexing, 22" OD band reel low material / no band sensors and 36" long hot air tunnel with a 5" wide x 4" high aperture. Control panel has an AB controller and touch screen HMI.
OAD: 58"L x 58"W x 72"H (Bander) 40"L x 30"W x 70"H (Tunnel)
PDC, Model 75-ERL, Automatic, electronic registration, extra length sleeve labeler, tamper evident neck bander. Rated from 50 to 225 containers per minute – depending upon materials and application. Stainless steel construction. Band size range: 3/8" to 3" in Diameter x ¾" to 7" in Height. Equipped with dual 24" Long product worm screw infeed, 22" diameter film reel, splicing table, knife cut off, "low material / no product" sensors and printed film registration with hand wheel jog. Control panel has PLC controller with HMI and jog / run switch and power on / drive stop with e-stop push buttons. Mounted on (4) leg frame with interlocking safety guarding.
OAD: 48" L x 48" W x 88" H
PDC, Model 75 ERLT, Automatic sleever labeler rated from 50 to 250 sleeves per minute – depending on materials, application and machine configuration. Size range: 3/8" to 3" in diameter and 3/4" to 7" in height, film registration and extra length label capable. Equipped with 112" long x 3-1/4" wide container conveyor and has 36" long double container index worm screws, knife cut off, tamp on applicator 24" OD label reel and 24" OD label rewind reel. Swing arm control panel has feed, film, static eliminator, start, stop, jog and e-stop controls with variable speed dial and statis light bar. Mounted on base frame with interlocking safety guarding and leveling legs.
OAD: 112" L x 72" W x 93" H
PDC Model 75M, Automatic shrink sleeve labeler, tamper evident neck bander and shrink tunnel rated from 0 to 300 containers per minute – depending upon materials and application. Stainless steel construction. Lay Flat: 4.8" Band Diameter 3/8" to 3", Band height 3/4" to 2".Band cut-off unregistered Equipped with 24" long product in feed worm screw with knife cut off, 22" OD band reel with scrape reel, low material / no product sensors and hand crank adjustable. Control panel has micrologix controls with main drive, unwind drive, static eliminator, choke feed, film out sensor switches with start and stop push button and statis light bar. Mounted on (4) height adjustable leg frame with interlocking safety guarding.
OAD: 83" L x 42" W x 84" H
PDC Model 75M, Automatic shrink sleeve labeler, tamper evident neck bander and shrink tunnel rated from 0 to 300 containers per minute – depending upon materials and application. Stainless steel construction. Lay Flat: 4.8" Band Diameter 3/8" to 3", Band height 3/4" to 2".Band cut-off unregistered Equipped with 24" long product in feed worm screw with knife cut off, 16" OD band reel with scrape reel, low material / no product sensors and hand crank adjustable. Control panel has A/B controller with touch screen HMI controls and run, jog, stop, e-stop push buttons and statis light bar. Mounted on (4) height adjustable leg frame with interlocking safety guarding.PDC Model KRC/84654 roll over conveyor shrink tunnel with 5" x 5" aperature and 45" long tunnel with 53" long ground clearence.
OAD: 84" L x 48" W x 77 "H Bander 45" L x 25" W x 66" H Tunnel
PDC Model 75-ERL, Automatic shrink sleeve labeler and tamper evident neck bander, rated from 50 to 225 containers per minute – depending upon materials and application. Stainless steel construction. Band lay flat, 6.25" Band diameter 3/8" to 3", Band height 3/4" to 7" Equipped with 24" long product in feed screw and splicing table, knife cut off, "low material" / "no product" sensors and printed film registration. Control panel has Allen Bradley PLC has touch screen HMI with start, stop, e-stop push buttons and statis light bar. Mounted on (4) leg frame with interlocking safety guarding.
OAD: 56"L x 64"W x 99"H
PDC, Model F-180, automatic neck bander. Rated from 10 to 100 containers per minute – depending on materials, application and machine configuration. Container size range: 1½" to 6" in diameter and 2¾" to 10" in height. Equipped with 24" product in feed worm screw, star wheel container indexing, dual 18" diameter film reels on 5" cores, dual unwind stations; one before and one after the 10½" wide perforation blade, static elimination, pull down applicator and interlocking safety guarding. Control panel includes push buttons for drive jog, perforation jog, start / reset and E-stop. Switch controls for feed drive on / off, static elimination on / off, cool / heat, choke feed manual / auto and jog / run. Variable speed dials for main drive, perforation low and perforation high.
OAD: 101"L x 53"W x 86"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.