TRIpack Machines

TRIpack Labeler Sleever HSA-405-WB

• Manufacturer: TRIpack
• Model Number: HSA-405-WB
• Frain Number: 5J1500

TRIpack, Model HSA-405-WB, Automatic shrink sleever. Rated up to 500 products per minute – depending on materials and application Layflat sleeve size range: 40mm (1.6") to 400mm (16"). Cut length range: 30mm (1.2") to 330mm (13.2"). Product OD range of: 25mm (1") to 250mm (10") and capable of running most shrinkable films as PET, PETG, OPS, PLA, and PVC with proper change parts. Equipped with powered film assist assembly, zero tension web design, with loading and unwind station and has 19" maximum film OD with film gauge tolerance of 35 to70 microns (1.38 to 2.75 mil) and lay flat tolerance of (-0mm / +1mm). Mandrel / bullet design film delivery system with a multi-blade knife assembly and material out sensor, film tensioner, low film indicator, air knife and mechanical tamping. Control panel has A/B PLC controller with touch screen HMI operator interface, interlocking safety guarding and e-stops. Mounted on (4) leg frame with safey guarding, casters and leveling legs.

OAD: 66"L x 48"W x 103"H

TRIpack Shrink Tunnels HT-2

• Manufacturer: TRIpack
• Model Number: HT-2
• Frain Number: 5J1393

TRIpack stainless steel over the conveyor convection air neck band shrink tunnel. Product per minute – depending on materials and application. Total Aperture: 12" in Height; 10" in Width. Tunnel: 60" in Length. Equipped with recirculating blower, digital temperature controller and mounted on a height adjustable frame with locking casters. Includes a stainless steel conveyor with 7½" wide x 120" long belt.

OAD: 127" L x 40" W x 74" H

TRIpack Labeler Sleever HSA240 / WSN 300 3M

• Manufacturer: TRIpack
• Model Number: HSA240 / WSN 300 3M
• Frain Number: R32460

TRIpack Model HSA-240 / AMF WSN, stainless steel, shrink neck bander and sleever with conveyor and steam shrink tunnel system. Rated from 20 to 200 containers per minute – depending on materials and application.

TRIpack Model HSA-240 shrink sleever with Layflat sleeve size range of: 40mm (1.6") to 245mm (9.8"). Cut length range of: 30mm (1.2") to 250mm (10"). Product OD range of: 25mm (1") to 100mm (4") and capable of running most shrinkable films with proper change parts. Equipped with powered film assist assembly, zero tension web design, loading / unwind station with 19" maximum film OD and 288" long x 4¾" wide stainless steel delron container conveyor. Mandrel / bullet design film delivery system and multi-blade knife assembly, with material out sensor, film tensioner and low film indicator. Control panel has A/B PLC with HMI operator interface, interlocking safety guarding and e-stops.

AMF WSN 300 3M, (2) zone, (4) tier steam heat shrink tunnel with 5" wide x 12" high aperature x 118" long steam shrink chamber with remote electric steam boiler. Maximum operating temperature of 212° F and adjustable manifold for direct steam heat where needed with steam exhaust controlled by turn of a knob and steam pressure of 3 to 4 Kg/cm2 and 43 to 57 psi with cool water consumption of 200 litres or 80 gallons per hour and has stand alone steam generator. Both mounted on stainless steel frames with casters and leveling legs.

OAD: 288" L x 46" W x 98" H